In case you are searching for ideas on the best way to do basement pole covers, you will be astounded to see all the available options for you. The posts are there to support the main beams of your home. An ideal approach to make them blend into your recently completed basement is to cover them some way or another.
Picking an approach on how to hide a basement support post is simple. In fact, the most traditional design is to cover and box them with decorative wood.
It has become an exceptionally well-known choice on home remodeling shows to present renovators getting rid of support beams or load-bearing walls on the basement or main floor. Although this is an alternative, it is, by far, the most costly and troublesome method for managing the support poles or beams. This is because support beams hold thousands of weight.
Hiding or removing these posts inappropriately could make the floor sagging and influence the integrity of the structure of your house. In addition, you have to contract a general contractor or structural engineer who has extensive experience in moving support beams to evaluate whether it is a possibility. At times, the expense doesnt warrant moving the post. Be that as it may, dont fret, because we have seen lots of alternatives you can try at home. Read on to find out more about basement pole cover ideas or how to remove a basement support post.
How To Cover A Basement Support Post
Do you have an ugly basement beam support post? Are you thinking about how to manage them? Or maybe you like to thump down a wall on the main floor, but not certain how to manage a support beam. However, those unattractive metal poles or basement beam support post dont need to stay unattractive.
Here are a few alternatives on how to cover a basement support post:
Pole Wraps, Pole Covers, Or Column Covers
First, the most affordable alternative to cover those poles is by utilizing basement pole covers, column covers, or pole wraps. Whatever you desire to call them, it will work.
The huge box stores offer an assortment of cheap basement pole covers from paint-ready smooth covers to faux wood. On the other hand, smaller specialty stores likewise offer more high-end kind of basement pole covers.
Utilize The Pole
One of the most popular basement pole cover ideas is to include the pole in the design. In particular, most normal uses are as a major aspect of a breakfast bar or family room bar, as a room divider, as a bookshelf, or a mix of bookshelf/room divider.
The Pole Becomes Part Of The Design
At the point when the posts become a portion of the structure, you cannot seem to notice that there support posts in the room. In any case, the posts flow normally all through the space and its hard to tell which post is decorative and which post is holding up the floor.
How To Hide A Basement Support Post
To prepare your basement support post to be covered with your preferred wood, you can follow the steps below:
First, measure the height of the poles. Ensure your four pieces of 1x6x12-inch wood fit those measurements.
Second, build the boxes by assembling a U-shaped box with three sides and secure it appropriately with screws. Hold the box around the pole, and at that point, screw the fourth side to make a four-sided box. You should install the shims on the base or at the highest point of the box firmly with a hammer to keep it from moving.
Third, drill a hole on each side of the box two feet from the base. After that, drill another arrangement of holes in the center, but then another set two feet down from the ceiling. You will have drilled 12 holes after finishing this step.
Next, add the foam. While applying the spray foam, be mindful so as not to over-apply. It can obliterate the box while expanding in case you overfill the box. The foam will then harden and secure the box wrapped over the pole. You can then wait a day to get rid of the shims. Moreover, it is important to realize to use hard-dry foam and not non-expanding froth. Furthermore, utilize screws to assemble the box, not nails. Since under the pressure of the foam, nails come loose easily.
Lastly, finish the outside of the box. In order to cover the box, utilize wood paneling, and secure them with tiny finishing nails. Moreover, introduce a baseboard around the base and a crown on top to complete the look. Also, add a rack to make it resemble a table. You can additionally install drywall and paint it to look smooth and new.
Can You Remove A Basement Support Post?
A basement support post exists to avoid a foundation frame in a wood-frame home to sag under the weight of the entire structure. In general, these posts material is steel or wood, and you can find them underneath beams or floor joists.
In addition, they have a flexible screw top that you can raise to fit the space between the ceiling and the floor of the basement, and if the frame begins sagging, you can adjust in accordance with the sagging frame for a better fit. Moreover, the basement beam support post intends to support the heaviness of the house above. In fact, they support huge amounts of weight from above. Thus, moving them without some planning is typically not a smart ideaexcept if you need your home to come down.
You can only remove the post they support above in case you install a new and sturdier beam. You need to make sure that the new beam can carry the heaviness of the floor above over an extended range. To decide the beams necessary size and range limit, you need to request a structural engineer to compute the load prerequisites.
On the other hand, it is important to realize to try not to do this without anyones help, as placing in another beam not intended to deal with the weight could bring genuine harm to your home. In general, people use wood glue-laminated beams for such purposes, but they frequently meddle with headroom in the basement region. Another option is a steel I-beam, which you can then box to hide it. This will be a more costly choice, however.
The post How To Hide Or Remove A Basement Support Post With Ideas appeared first on Home Remodeling Contractors | Sebring Design Build.